تأثیر سرما بر شل شدن پیچ اباتمنت در ایمپلنت‌های با هگز داخلی در ایمپلنت‌های تیشو لول

  • Tohid Khodadadi توحید خدادادی دکترای حرفه‌ای، کمیته‌ی پژوهش‌های دانشجویی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
  • Reza Khodadadi رضا خدادادی استادیار، مرکز تحقیقات ایمپلنت‌های دندانی، گروه پروتزهای دندانی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
  • Toktam Khodadadi تکتم خدادادی دکترای حرفه‌ای، کمیته‌ی پژوهش‌‌های دانشجویی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
  • Amirhossein Fathi امیرحسین فتحی استادیار، مرکز تحقیقات مواد دندانی، گروه پروتز، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران
  • Farshad Nadian فرشاد نادیان دستیار تخصصی، کمیته‌ی پژوهش‌های دانشجویی، گروه پروتزهای دندانی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران

چکیده

مقدمه: ششل شدن پیچ اباتمنت، یکی از شایع‌ترین مشکلات و عوارض پس از درمان ایمپلنت دندانی می‌باشد. لذا به منظور کاهش این عارضه ارائه راهکاری منطقی با کمترین تداخل با درمان می‌تواند از اهمیت بالایی برخوردار باشد. به این منظور این مطالعه با هدف بررسی تأثیر سرما بر شل شدن پیچ اباتمنت در ایمپلنت‌های با هگز داخلی در سیستم‌های ایمپلنتی متفاوت تیشو لول انجام شد

مواد و روش ها: این مطالعه به صورت in-vivo در سال ۱۴۰۲ در مرکز تحقیقات دکتر موسوی دانشکده‌ی دندان‌پزشکی اصفهان به بررسی ایمپلنت‌های تیشو لول از نظر میزان شل شدن پیچ اباتمنت در اثر سرما پرداخت. ایمپلنت‌ها در سه گروه 10‌تایی شامل ایمپلنت ) DIO کره‌‌ای(، ) ITIسوئیسی ( و Zimmer )آمریکایی( تقسیم شدند. abutment 5 نمونه با اسپری سرما اندو و 5 نمونه بدون سرما تورک داده شدند. سپس همه‌ی اباتمنت‌ها در دستگاه ترموسایکل با 5000 دور قرار داده شدند و میزان دتورک این گروه‌ها اندازه‌گیری شد. پس از جمع‌آوری اطلاعات با استفاده از آزمون Covariance اقدام به تحلیل نتایج در سطح خطای 0/05 انجام شد (سطح معنی‌داری 0/05 = α).

یافته ها: میزان دتورک ایمپلنت‌های تحت اثر سرما  N/cm2/19 ± 25/78 و گروه بدون اعمال سرما برابر باN/cm  2/08 ± 25/40 بود. همچنین تفاوت معنی‌داری بین قبل از سرد کردن و بعد از سرد کردن ایمپلنت‌های DIO و ITI از نظر میزان دتورک مشاهده شد (05/0 > p value). ولی میزان دتورک پیش و پس از اعمال سرما در ایمپلنت‌های Zimmer تفاوت معنی‌داری نداشت (0/05 < p value).

نتیجه گیری: سرما، عامل مؤثری در افزایش میزان نیروی دتورک پیچ اباتمنت‌ها می‌باشد. ولی نوع ایمپلنت نیز عامل مؤثری در میزان اثرگذاری سرما بر دتورک لازم برای شل کردن پیچ اباتمنت بود و بیشترین میزان دتورک پس از اعمال سرما مربوط به ایمپلنت‌های ITI و کمترین میزان دتورک مربوط به ایمپلنت Zimmer بود.

کلید واژه‌ها: اباتمنت؛ پیچ؛ ایمپلنت دندانی؛ دما

بیوگرافی نویسنده

Reza Khodadadi رضا خدادادی, استادیار، مرکز تحقیقات ایمپلنت‌های دندانی، گروه پروتزهای دندانی، دانشکده‌ی دندان‌پزشکی، دانشگاه علوم پزشکی اصفهان، اصفهان، ایران

dentitry

مراجع

1. Silva Junior MF, Batista MJ, de Sousa MdLR. Risk factors for tooth loss in adults: A population-based prospective cohort study. PLoS One 2019; 14(7): e0219240.
2. Stajčić Z, Stajčić LS, Kalanović M, Đinić A, Divekar N, Rodić M. Removal of dental implants: review of five different techniques. Int J Oral Maxillofac Surg 2016; 45(5): 641-8.
3. Lee JH, Lee JB, Kim MY, Yoon JH, Choi SH, Kim YT. Mechanical and biological complication rates of the modified lateral-screw-retained implant prosthesis in the posterior region: an alternative to the conventional Implant prosthetic system. J Adv Prosthodont 2016; 8(2): 150-7.
4. Newman M, Takei H, Carranza FA, Klokkevold P. Carranza's clinical periodontology. 9th ed. Philadelphia, PA: W.B. Saunders Co; 2002. p. 1286-2006.
5. Park JK, Choi JU, Jeon YC, Choi KS, Jeong CM. Effects of abutment screw coating on implant preload. J Prosthodont 2010; 19(6): 458-64.
6. Eblaghian G, Reyhani Mohamadi A, Kalantari Nezhad M. Comparative study of two different implants with hexogonal connection on the amount of bacteria accumulated at the implant platform site: An in-vivo study [in Persian]. J Dent Med 2021; 34(1): 33-40.
7. Mencio F, De Angelis F, Papi P, Rosella D, Pompa G, Di Carlo S. A randomized clinical trial about presence of pathogenic microflora and risk of peri-implantitis: comparison of two different types of implant-abutment connections. Eur Rev Med Pharmacol Sci 2017; 21(7): 1443-51.
8. Jo JY, Yang DS, Huh JB, Heo JC, Yun MJ, Jeong CM. Influence of abutment materials on the implant-abutment joint stability in internal conical connection type implant systems. J Adv Prosthodont 2014; 6(6): 491-7.
9. Karpavicius D, Stasikelyte M, Baseviciene N, Sakalauskaite U, Ratkute S, Razukevicius D. The determination of pH of peri-implant crevicular fluid around one-piece and two-piece dental implants: A pilot study. Clin Exp Dent Res 2019; 5(3): 236-42.
10. Misch CM. Dental implant prosthetics. Philadelphia, PA: Elsevier Mosby; 2015.
11. Mencio F, Papi P, Di Carlo S, Pompa G. Salivary bacterial leakage into implant-abutment connections: preliminary results of an in vitro study. Eur Rev Med Pharmacol Sci 2016;2 0(12): 2476-83.
12. Peruzetto WM, Martinez EF, Peruzzo DC, Joly JC, Napimoga MH. Microbiological seal of two types of tapered implant connections. Braz Dent J 2016; 27: 273-7.
13. Srimurugan-Thayanithi N, Abou-Ayash S, Yilmaz B, Schimmel M, Brägger U. Effect of abutment cooling on reverse torque values of abutment screws: An in vitro study. Int J Oral Maxillofac Implants 2023; 38(1): 94-100.
14. Koosha S, Toraji S, Mostafavi AS. Effect of fluid contamination on the reverse torque values of abutment screws at implant-abutment connections. J Prosthet Dent 2020; 123(4): 618-21.
15. Jalali H, Moslemion M, Nokar S. Effect of blood and saliva contamination of the implant-abutment interface on the amount of preload. Dent Adv Res 2018; 3(154): 74-90.
16. Neshandar Asli HN, Vadiati Saberi B, Fatemi AS. In vitro effect of chlorhexidine gel on torque and detorque values of implant abutment screw. Indian J Dent Res 2017; 28(3): 314-9.
17. Kallus T, Bessing C. Loose gold screws frequently occur in full-arch fixed prostheses supported by osseointegrated implants after 5 years. Int J Oral Maxillofac Implants 1994; 9(2): 169-78.
18. Mahgoli H, Hjmiragha H, Nokar S, Jafarian Y. Manual maximum closing torque in three implant abutment systems [in Persian]. JDM 2019; 32(2): 75-82.
19. Tsuge T, Hagiwara Y. Influence of lateral-oblique cyclic loading on abutment screw loosening of internal and external hexagon implants. Dent Mater J 2009; 28(4): 373-81.
20. Tzenakis GK, Nagy WW, Fournelle RA, Dhuru VB. The effect of repeated torque and salivary contamination on the preload of slotted gold implant prosthetic screws. J Prosthet Dent 2002; 88(2): 183-91
چاپ شده
2024-07-06
استناد به مقاله
1.
توحید خدادادیTK, رضا خدادادیRK, تکتم خدادادیTK, امیرحسین فتحیAF, فرشاد نادیانFN. تأثیر سرما بر شل شدن پیچ اباتمنت در ایمپلنت‌های با هگز داخلی در ایمپلنت‌های تیشو لول. مجله دانشکده دندانپزشکی اصفهان [اینترنت]. 6جولای2024 [ارجاع شده 22جولای2024];. Available from: http://jids.journalonweb.ir/index.php/jids/article/view/2106

میزان دانلود در سال میلادی جاری

Download data is not yet available.

Most read articles by the same author(s)

سخن سردبیر

دکتر رامین مشرف

مجله‌ دانشکده دندان‌پزشکی اصفهان از سال 1383 به زبان فارسی و با هدف انتشار ماحصل زحمات پژوهشی اساتید و دانشجویان دندان‌پزشکی ....

ادامه

شماره کنونی

پشتیبانی و راهنمایی

         doaj

 

Copyright © 2021, This is an original open-access article distributed under the terms of the Creative Commons Attribution-noncommercial 4.0 International License which permits copy and redistribute of the material just in noncommercial usages with proper citation.

کلیه حقوق مادی و معنوی این سایت متعلق به دانشگاه علوم پزشکی اصفهان می باشد